Making Fonts: Essonnes

Like a tiny seed growing into a giant tree or a butterfly emerging from a chrysalis — type design isn't! Forward steps, missteps, steps retraced — that is type design. Sometimes the development is natural and organic; at others it is perhaps more akin to working for a typographic Dr. Moreau. During the long process, ideas germinate and perish, shapes contort and bend, new concepts are explored and ignored, and printers run out of toner.

Type design demands a goal; drawing pretty shapes isn't enough. Pretty forms and post rationalization also isn't enough. The function of the type needs to be in its DNA. When the type in question is destined for the retail type world, where there are no strict deadlines and clients to worry about, that goal is more elastic: it can mature and evolve along the way. In the case of Essonnes, the breadth of that goal grew quite dramatically over the years of its development.

Essonnes fonts [pronounced Esson] began back in 2011 when I, on a whim, decided to spend what little money I had that wasn't going towards college, on a book. The book was titled, "Specimen des Caractères de la Fonderie de P. Didot, L'Ainé et de son Fils Jules Didot" and it was to dominate the next four years of my life.

I bought the book because of one letter: the lowercaseg. Earlier, I had stumbled across the serifgsomewhere and it became a fixture in my brain. While at school, I tried to fit it into nearly every lettering project I did. I lamented when a brand or a headline didn't have agin it because I couldn't get a chance to try out my favorite letter. Eventually it came time to give that letter a home. That home eventually grew into the typeface, Essonnes.

When I begin a new project, I know the first few rounds of drawing are going to get tossed out. A few bits and pieces will stick around and slowly, as I keep redrawing, I'll end up with something I can work with. As I drew my belovedgfor the first time, I knew it wouldn't last, and, as it turned out, it didn't. It was probably a day or so later, when I had the basic character set drawn and printed out, that I really got a sense of where I was going and I promptly changed everything.

So I had a few letters, a book, and some free time between classes and other jobs. As I took the time to pore over the book, I noticed something odd: Didones were used for text, and they looked good. How was this happening? Weren't Didones solely display faces? What happened between 1819 and 2011 that lead to this seemingly pervasive (and completely wrong) idea? As I continued to draw, the text Didot kept coming back to me. Eventually, my goal became clear: no longer was I making a little two-weight display family. Essonnes was going to bring back what was lost from the original: the text Didot.

I started over.

Top: The original text Didot at 9 point.

Bottom: A smattering of characters with character. They were really into the listing S back then.Type has an interesting way of directing its designer. In this case, the type decided it wanted different families for different sizes. It wanted a separate text family and a separate display family. This meant optical families, and optical families (usually) mean interpolation. Interpolation is like an American mass transit system; it gets you most of the way to your destination but it's often messy and has a few awkward characters.

The similarities—and differences—between Essonnes Text (blue) and Display (red).In keeping with my stubborn practices, I decided early on that this wouldn't be a study in interpolation. There wouldn't be any sliding of sliders or typing of values to get my text family or my regular weight. Everything would be built from scratch. To be clear, this doesn't mean the type is better (interpolating and fixing is my usual M.O.), it just means I am a stubborn jerk when it comes to optical weights. It also means that the Display and Text families are two different creatures that share a common ancestor. Much like various Great Ape subspecies, there is a difference between them; most people won't be quite able to tell what that difference is if they were to spot them in the wild, but they know they are different. Forgoing interpolation allowed me the freedom to really push the two versions into their respective roles.

Not worrying about compatible type allowed me to do things like this. Essonnes Text (blue) and Display (red).

It was around this time the type told me that if I was going to make two separate optical families, I may as well make a higher-contrast "headline" family. Again, being stubborn, I ignored the possibility of interpolation and dove in.

At this stage, I decided to really push the designs. If I wasn't making type that was interpolation-compatible (the points between the various fonts didn't match up in number or places), I should really see where the different families would take me. After looking closely at the text weight in the book, and various other books I had added to my collection, I noticed something unusual: there was a little kink in the area where the curves would meet the stems in letters liken,m,h,b,d, etc. This little kink lead to an idea: what if I used it to increase the counter sizes? As the contrast rose, the counters shrunk. Increasing the x-height or making the characters wider can only do so much, especially in the bolder weights; this little kink might allow me to keep the counters nice and open and give a bit of personality and bite to the text family.

A closeup of Essonnes Text Bold. Kinks are circled.

With the text weight mostly sorted, or at least temporarily sorted, I turned to the headline. Like most Didones, it made sense to forgo any serif bracketing here. The capitals also narrowed a bit. From there I started to add a little more outside influence—from Victorian England. Mid-to late-nineteenth-century type was an exercise in pushing the limits, especially in high-contrast display types. I wanted to channel some of this into the headline, and a little less of it into the display families of Essonnes.

From left to right: Essonnes Headline, Display, and Text.

After choosing to include more Victorian Scotch-Roman elements, I decided it was alright to allow myself larger deviations from my original muse. My goal with Essonnes wasn't to make a revival but a reinterpretation–the Didone I would want to use. One that fits the requirements of today and not of 1819. This meant that features such as the "spiky horn" serifs became spiky horns and not nubby traditional serifs.

From here, it was time to close the books. From mid-2012 until I released Essonnes, I wanted to have as little influence from anywhere as possible. As I continued to work on it, I ended up redrawing pretty much every aspect of the typeface; proportions changed, serif brackets increased in size, then they got smaller, then they got larger again; x-heights went up and down, italics contorted in pretty much every way imaginable. At this stage, I also took one last long look at my favoritegbefore relegating it and its uncommon brethren to OpenType-accessable stylistic alternates. Once all of these choices were made—and drawn—I had something I could finish.

The alternates in Essonnes Headline Bold

Because I work like a weird-o, I often do my hinting as I draw. I like to tell myself this allows me to better evaluate the type as I draw it but what it really does is drive me insane when I decide to change a design. I also had all of the OpenType features ready to go; all that was left was the adjustment of some accents and a few odds and ends.

Finishing a typeface is perhaps the strangest part of the whole process. Years of work go into making it and, quite abruptly, it's all finished. The accents are all in place, the small caps are all coded to their respective alternates, and that stubbornslooks good. It's like jumping out of a plane with a blindfold on and landing on a giant pillow: you have no idea where the journey is taking you and then, all of the sudden, it's over.

More about Essonnes fonts.